Link collection

Link collection was developed to serve as a knowledge base and collection of useful tools that can help you at planning, implementing or monitoring the district heating system decarbonization process.

 

Tool

 

Link

 

Description

Category (main focus)

 

Picture

Basics about DH

https://danskfjernvarme.dk/media/dvrlhhco/theroleofdistrictheating_en.pdf

Basics about district heating systems and how district heating creates value for society through integration with the overall energy system.

 

 basics

Basics about DH

IEA DHC - TS5

Annex - Integration of Renewable Energy Sources into existing District Heating and Cooling Systems

https://www.iea-dhc.org/2019-2024-annex-ts5

Deliverables outcoming from IEA DHC TS5 working group with the aim providing know how on RES DHC project development.

ST A - Potential assessement methodologies and technological factsheets

ST B - transformation guidelines and

 

best practice

 IEA DHC

 Emb3rs

 https://www.emb3rs.eu/platform/

The EMB3Rs platform has been designed to evaluate the reuse and trade of waste Heating and Cooling (HC) in a holistic perspective within an industrial process, energy system environment, or in District Heating and Cooling (DHC) systems under-regulated and liberalized market environment

best practice

 Emb3rs

 Thermal planning tool

KeepWarm •• Thermal planning tools (keepwarmeurope.eu)

 

best practice

 Thermal planning tool

District Heating Toolkit

https://energy.ec.europa.eu/topics/clean-energy-transition-initiatives/eu-coal-regions-transition/publications_en/district-heating-toolkit_en

Guidelines developed by EC for decarbonisation of district heating systems

best practice

 

Guide to District Heating

https://guidetodistrictheating.eu/guidance-for-cities-and-towns/how-to-get-started/

Guidelines developed by Interreg North-West Europe HeatNet NWE

best practice

 

Knowledge hub

https://prod.euroheat.org/dhc/knowledge-hub

The most comprehensive database of resources linked to district heating and cooling, including academic reports & studies, research project outcomes, market analysis as well as other relevant content for the sector.

best practice

 Knowledge hub

Factsheets from RES DHC project

https://www.res-dhc.com/en/know-how/publications/

Country factsheets about implemented strateges and performed actions

best practice

 RES DHC

Heat recovery

www.life4heatrecovery.eu

Database ofwaste heat recoverysolutions

best practice

 Heat recovery

ReUseHeat

https://www.reuseheat.eu/

 

best practice

 ReUseHeat

Upgrade DH

https://www.upgrade-dh.eu/en/publications-reports/ 

The Upgrade DH project aims to improve the performance of district heating networks in Europe by supporting selected demonstration cases for upgrading, which can be replicated in Europe.

 best practice

Upgrade DH

Infoportal für Großwärmepumpen LEA

Infoportal für Großwärmepumpen

This platform provides reliable information and supports in selecting suitable large heat pumps.

best practice, informative

 

The European Waste Heat Map

https://aau.maps.arcgis.com/apps/webappviewer/index.html?id=789b7faef30148bda20d320de9455919

This web map is a publicly available data repository with information on different waste heat sources from various projects.

mapping RES/waste heat

The European Waste Heat Map

The Pan-European Thermal Atlas (Peta 5.2)

https://www.seenergies.eu/peta5

This web map is a publicly available data viewer with various information on heating and cooling sector parameters developed in the Heat Roadmap Europe project series (including the sEEnergies project).

mapping RES/waste heat

Pan European Thermal Atlas

Hotmaps

 https://citiwatts.eu/map

Hotmaps is a software for studying the integration of RES in district heating systems by providing datasets as well as tools for estimating demand reduction scenarios and analysing dispatch and related performance indicators for various supply portfolios under different conditions.

mapping RES/waste heat

Hotmaps

Waste Heat Toolbox

https://green-heat.net/waste-heat-utilisation/waste-heat-toolbox

The Toolbox is aimed at supporting entrepreneurs and investors who would like to discover untapped potential of waste heat, understand technological aspects of its recovery into usable energy and get familiar with formal, administrative and financial issues

of starting a new business based on waste heat.

planning

Waste Heat

CE - Heat Manual for the estimation of regional waste heat potential

https://green-heat.net/waste-heat-utilisation/waste-heat-potential/manual-for-the-estimation-of-regional-waste-heat-potential

How waste heat potential in a region can be estimated in an easy manner.

mapping RES/waste heat

CE Heat Manual

GeoDH Map

http://geodh.eu/geodh-map/

This system presents the geothermal resource

assessment and highlights the areas where potential for geothermal district heating exists. Based on currently available information in terms geological data, already operational district heating systems, and heat demand, it

shows the potential in the 14 project countries: Italy,

mapping RES/waste heat

GeoDH Map

Heat Roadmap Europe - HRE

https://heatroadmap.eu/maps/

Country Heat Maps And Atlases

mapping RES/waste heat

Heat Roadmap

ONLINE PACKAGE FOR VIRTUAL STUDY TOURS (ENTRAIN)

https://programme2014-20.interreg-central.eu/Content.Node/ENTRAIN/Study-tours.html

 

mapping RES/waste heat

 

SOLAR DISTRICT HEATING – PLANT DATABASE

https://www.solar-district-heating.eu/en/plant-database/

 

mapping RES/waste heat

 

Datacenter map

https://www.datacentermap.com

Map of datacenter (non complete)

mapping RES/waste heat

Datacenter map

Geothermal Map

https://mapy.geology.cz/geotermalni_potencial/

Geothermal potential map

mapping RES/waste heat

Geothermal Map1

Geothermal Map2

DBFZ

Dashboard BIOMASSEPOTENZIALE in Deutschland (Pilot-SBG)

Interactive web-application for visualising biomass and bio-energy related data (potentials, flows, use) in Germany (and the EU)

Mapping, calculation RES/biomass, bio- energy

DBFZ

THERMOS

https://www.thermos-project.eu/thermos-tool/tool-access/

The tool enables the modelling of heating and cooling network systems and their optimal design. It includes a wide range of functions such as the modelling of pipe and civil engineering costs as well as demand models.

planning

THERMOS

QM Toolbox

https://programme2014-20.interreg-central.eu/Content.Node/ENTRAIN.html

Several documents on the quality management of heating network systems are available. These tools support the more efficient realisation and operation of heating networks with a variety of renewable energies.

planning

QM Toolbox

Training Toolbox

https://programme2014-20.interreg-central.eu/Content.Node/ENTRAIN.html#TRAINING_TOOLBOX

Training materials and tools developed within the ENTRAIN project: the training sessions conducted by our Austrian expert partners ("Train the trainers"), the local training sessions in our five target regions, and a collection of study tours of renewable disctrict heating plants across Europe.

planning

Training Toolbox

Heat Planning Toolbox

https://planenergi.eu/projects/heatplan-toolbox/

The toolbox offers tools and advices for a full heat planning process, from the initial steps to the mapping, going then to the analysis and comparison of the scenario, to finally close with the planning and implementation of the most relevant measures.

planning

Heat Planning Toolbox

AGFW Guidelines for DH transformation planning

https://www.agfw.de/transformationsplan

The document summarises helpful tips, tried-and-tested

ideas and procedures that address the creation of transformation plans (based on German funding guidelines). It essentially addresses the topics of actual state analysis, determination of potential, target state, path to greenhouse gas neutrality and cost framework.

planning

AGFW

The sEEnergies Open Data Hub

https://s-eenergies-open-data-euf.hub.arcgis.com/

This is a platform for exploring and downloading GIS data produced in the sEEnergies-Project and presented in the Pan-European Thermal Atlas (Peta 5.2) web map. Data can be accessed via APIs and downloaded to GIS formats.

planning

sEEnergies Open Data Hub

EnergyPRO

https://www.emd-international.com/energypro/

energyPRO is the a comemrcial software for modelling, optimising, and simulating ditrict energy projects with cross sectional optimization including electricity, PtX, hybrid and thermal energy (such as process heat, hot water and cooling).

planning

EnergyPRO

ScenoCalc District Heating

https://www.scfw.de/

This Excel-based calculation tool can be used to calculate the useful solar heat yield of solar thermal systems integrated into heating networks. A preset parameter selection can be used, but also own data can be implemented.

planning

ScenoCalc District Heating

Simple Heat Pump calculation

https://www.res-dhc.com/en/know-how/toolbox/

Excel calculation tool offers the economics calculation of electrical heat pumps in district heating networks. Its purpose is to evaluate the cost-effectiveness of a heat pump in an already existing grid with a solar thermal plant.

planning

Simple Heat Pump calculation

Bioraise

http://bioraise.ciemat.es/Bioraise/home/main 

GIS calculation tool for the estimation of biomass potential in a user defined area, according to the typology of forest species.

planning

Bioraise

Interreg CE

ENTRAIN - GUIDELINES FOR THE SIMPLIFIED EVALUATION OF THE POTENTIAL FOR

https://programme2014-20.interreg-central.eu/Content.Node/ENTRAIN/Guidelines-for-evaluation-of-renewable-heat-potential-[ENG].pdf

The guidelines provide an overview of the necessary information that is important for a development of DH projects and their financing. By presenting the most important questions for each key topic, the tool lays the foundation for a potential analysis.

planning

ENTRAIN GUIDELINES

hot-SPOT model

https://zenodo.org/records/4284531

GIS based model aimed at assessing the national techno-

economic potential of district heating (DH) based on renewables and excess heat sources. The model uses an optimization approach to match heat demand and heat sources at large scale level, while keeping a high degree of spatial detail.

planning

hot SPOT model

REWARDHeat project, Results & Deliverables

https://www.rewardheat.eu/Project-deliverables/ 

The overall objective of REWARDHeat is to demonstrate

a new generation of low-temperature district heating and cooling networks that will be able to recover renewable and waste heat, available at low temperature.

Among public available material there are a tool box and

several guidelines

planning

REWARDHeat

Danish energy agency catalogue

https://ens.dk/en/analyses-and-statistics/technology-catalogues

Technology Data catalogues include technology data for

technologies for centralized and decentralized production of electricity and district heat - Technology Catalogues are separated into eight different categories; Catalogue about electricity generation and DH available in version 16

planning

Danish energy agency

City Energy Analyst

https://www.cityenergyanalyst.com/ 

The City Energy Analyst (CEA) is an urban building energy modeling (UBEM) platform and one of the first open- source initiatives of computation tools for the design of low-carbon and highly efficient cities.

planning

City Energy Analyst

Sowhat tool

https://sowhatproject.eu/sowhat-tool/ 

The tool offers the user the ability to understand the potential for waste heat/cooling recovery and use at Manufacturing and Community levels.

planning

Sowhat tool

PILEDHC

https://www.supsi.ch/en/geothermal-energy 

PILEDHC is a dynamic simulation program for the

evaluation of low-temperature district heating systems (also called 5th generation). It is based on PILESIM2, to which some components have been added, such as hybrid thermal and photovoltaic (PVT) modules, and a piping network whose length is user-defined, that is

planning

 

Power-To-X and District Heating

https://danskfjernvarme.dk/media/pt4lfhpe/power-to-x-and-district-heating_english-version_web.pdf 

 

planning

 

PERFORMANCE ASSESSMENT OF DHC SYSTEMS (WEDISTRICT)

https://www.wedistrict.eu/new-publication-performance-assessment-of-district-energy-systems-with-common-elements-for-heating-and-cooling

 

planning

 

Solar District Heating in cities

https://www.solar-district-heating.eu/wp-content/uploads/2018/05/20171116-3-SDHp2m_Implementation-of-SDH-in-Cities-with-DH_27.11.2017.pdf

 

planning

 

Guideline for a spatial multicriteria analysis

https://programme2014-20.interreg-central.eu/Content.Node/ENTRAIN/A.T3.3-Guideline-MultiCriteriAnalyses.pdf

 

planning

 

Guide for strategy development

https://www.res-dhc.com/wp-content/uploads/2021/09/RES-DHC_WP3_Task3.1_D3.1_Guideline-for-strategy-development-4.pdf

 

planning

 

Solar district heating guidelines

https://www.solar-district-heating.eu/wp-content/uploads/2018/06/SDH-Guidelines_update_09.2017.pdf 

 

planning

 

Cool DH

https://www.cooldh.eu/uncategorized/calculator-on-savings-for-new-high-efficient-pipe-types-for-internal-distribution-in-buildings

Calculator on savings for new high-efficient pipe types for internal distribution in buildings

planning

cooldh